Alabama DMV Practice Test 15

Regulatory signs provide notice to road users of traffic laws and must be obeyed. Where this sign is posted, making a right turn is prohibited.

Backing up is always dangerous because it is hard to see behind your vehicle. Use extra caution when backing up.

Develop a routine for entering and leaving your car. Before switching on the ignition, buckle your safety belt and see that all passengers do likewise.

Regulatory signs provide notice to road users of traffic laws that must be obeyed. This particular sign tells you the maximum speed limit for the stretch of highway where it is posted. You may drive more slowly than the posted speed limit, based on road conditions, but it is illegal to drive any faster than the posted speed limit.

When driving in a work zone, adjust your speed for the traffic conditions and don’t follow other vehicles too closely. Be attentive to workers and machines in the work zone.

Warning signs are usually yellow with black markings. They alert you to conditions that are immediately ahead. There may be an upcoming change in traffic direction, a steep downgrade, or another potentially hazardous situation that requires action on the part of the driver.

You may encounter unexpected conditions in a construction zone. For the safety of yourself, other drivers, and construction workers, drive with extraordinary caution.

Even if your light is green, you must not enter an intersection unless you can get completely through the intersection before the light turns red. If you block the intersection, you can be cited.

The only way to remove the effects of alcohol from the body is to let time pass. Eating, drinking coffee, or taking a shower will not speed up this process.

All roads are slippery and dangerous when wet. This sign warns of conditions that can cause a driver to lose control of a car. A driver should slow down when coming upon wet pavement because it takes longer to stop.

A broken yellow line alongside a solid yellow line means that traffic in the lane next to the broken line may cross the line to pass, while traffic in the lane next to the solid line may not.

Unless otherwise posted, drivers in school zones may not drive faster than 20 mph. Always use caution when driving near children.

Treat a flashing red light the same as a stop sign. Come to a complete stop at the stop line or, if there is no stop line, prior to the crosswalk and before entering the intersection. Yield to all other traffic and pedestrians.

If you are already within an intersection when the traffic light turns yellow, you should clear the intersection as quickly as possible.

When leaving an interstate, you should maintain your speed until you enter the deceleration lane, at which point you should reduce your speed to the exit ramp’s posted advisory speed.

If you experience a sudden tire blowout, do not panic. Grasp the steering wheel firmly and take your foot off the accelerator to allow the vehicle to roll to a stop. Lightly apply the breaks when it is safe to do so. Do not move to the shoulder of the road until the car has slowed considerably.

Warning signs are usually yellow with black markings. This sign indicates that you are approaching a steep hill. Slow down and be ready to shift to a lower gear to control your speed and protect your brakes from damage.

At a yield sign, you must slow down or stop, if necessary, and give the right-of-way to crossing or merging vehicles. Yield the right-of-way to any cross traffic that is close enough to cause conflict.

When stopping your vehicle on the roadway, first check your mirrors for traffic. Be aware of surrounding drivers as you release the accelerator and allow your vehicle to slow. Move your foot to the brake pedal and press with steady pressure for a smooth stop.

When parking on a hill, you should always leave your vehicle in gear or in the “park” position. If there is no curb, you should turn your front wheels so that the vehicle will roll away from the center of the road if the brakes fail. If there is a curb, the front wheels should be turned toward it (if headed downhill) or away from and gently touching it (if headed uphill).

When making any turn, turn from the lane closest to the direction you wish to travel into the first available legal lane. If you are making a left turn from a one-way street, this means that you would make the turn from the lane nearest to the left curb.

To avoid contributing to chronic traffic congestion, you should not “rubberneck.” That is, you should not slow down to look at out-of-the-ordinary things.

If you are in a lane corresponding to a signal displaying a green arrow, you may proceed in the direction of the arrow when the way is clear. This is true whether the arrow is displayed alone or together with another signal.

When traffic control signals are not working, a driver must always treat the intersection as an all-way stop and come to a complete stop, unless otherwise directed by law enforcement. The driver must then look and yield the right-of-way before entering the intersection.

You must stop at a railroad crossing when directed to do so by a flagger, stop sign, or warning signal. Use caution when driving near railroad tracks.

White lines between lanes indicate that the lanes are traveling in the same direction. Broken white line markings indicate that it is legal to pass another vehicle when safe.

This sign indicates that you are approaching a railroad crossing. You must look, listen, slow down, and prepare to stop. Wait for any trains to pass before you proceed.

Watch for any pedestrian who may cross your path. If you see pedestrians near the road where you are driving, slow down and be prepared to stop, if necessary.

Drivers must always yield the right-of-way to pedestrians in the roadway, even if there is not a marked crosswalk.

Where this sign is posted, it is prohibited to make a right turn. It would be unsafe and unlawful to make a right turn at an intersection with this sign.

Warning signs are usually yellow with black markings. They alert you to conditions that are immediately ahead. This sign is used to warn drivers about an upcoming curve to the right.

An octagonal sign always means stop. When approaching a stop sign, you must come to a complete stop at the marked stop line and proceed only when it is safe to do so. If there is no stop line, stop before the crosswalk. If there is no crosswalk, stop before the intersection at a point from which you can see any oncoming traffic.

This sign indicates that there is a yield sign ahead. You should begin to slow down when you see this warning sign.

Drivers must yield the right-of-way to pedestrians who are crossing the street in any marked or unmarked crosswalk. In the interest of safety, drivers should yield the right-of-way to people crossing any street.

Because large commercial vehicles have large blind spots on each side, you should avoid driving beside them for long periods of time.

Use low beam headlights when driving in rain, snow, sleet, or fog. High beam headlights in adverse weather conditions lower visibility by reflecting off the precipitation and back into the driver’s eyes.

Passing on the right is permissible only if it is possible to do so without driving off the roadway. Never pass another vehicle on the shoulder because the other driver will not expect you to be there and may pull off the road.

Warning signs are usually yellow with black markings. They alert you to conditions that are immediately ahead. This sign warns that you are leaving a separated one-way highway and will soon be driving on a two-way highway.

Regulatory signs provide notice to road users of traffic laws that must be obeyed. This sign tells drivers that it is prohibited to make a U-turn.

When making a left turn, you must yield to pedestrians, bicyclists, or other vehicles moving on their green light.

After coming to a complete stop, you may turn left at a red light only if you are traveling on a one-way street and turning onto another one-way street. Only make the turn if there are no posted signs prohibiting such a turn.

Hydroplaning is caused by driving too fast on a wet road. Slow down when driving on wet pavement to prevent hydroplaning.

Bicycles on the road are vehicles with the same rights and responsibilities as motor vehicles. Motorists should respect the rights of bicyclists.

When being tailgated, create extra space in front of your vehicle and do not brake suddenly. Slow down gradually or merge into another lane to prevent a collision with the tailgater.

Never pass within intersections or at other intersecting points, such as parking lot entrances and alleyways. Any time your view is blocked by a curve or a hill, you should stay in your lane and assume that there is an oncoming vehicle just out of sight. Wherever signs and/or pavement markings permit passing other vehicles, you will have to determine whether or not you have enough space to pass in a safe manner.

This sign warns that there is a flag person ahead. Always follow directions given by a flagger. Flaggers normally wear orange or yellow vests, yellow-green shirts, or bright jackets. They use paddles and red flags to direct traffic through the work zone and to let workers or construction vehicles cross the road.

Warning signs are usually yellow with black markings. This sign indicates that a divided highway is beginning and cars should keep to the right.

When it is difficult to see due to darkness or poor weather, increase your following distance. This will give you more time to react to hazards that you may not see in advance.

Using a cell phone while driving is dangerous because it occupies the user’s eyes, hands, and mind. Even the most skilled drivers increase their risk of being involved in a crash by using a cell phone on the road.

Warning signs are usually yellow with black markings. They alert you to conditions that are immediately ahead. This sign warns that the roadway is slippery when wet.