Alabama DMV Practice Test 19

Warning signs alert drivers to upcoming hazards and are usually yellow with black markings. This sign warns drivers about potential traffic merging into their lane from the right.

Even if the signal is green, you must not enter an intersection unless you can get completely across before the light turns red. If you block the intersection, you can be cited.

This sign prohibits right turns. It is illegal to turn right at an intersection where this sign is posted.

This sign warns of of an approaching traffic signal.

When driving in a work zone, keep a safe distance between your vehicle and traffic barriers, trucks, construction equipment, workers, and other vehicles. Increase your following distance and do not tailgate.

This sign warns that two lanes of traffic going the same direction will soon merge into one lane.

Warning signs are usually yellow with black markings. This sign warns drivers that they are arriving upon a fork in the road and they must bear either right or left.

You should adjust your speed to travel smoothly with the other traffic on a roadway (provided that the other traffic is driving within the posted speed limits). Remember that vehicles moving in the same direction at the same speed cannot hit each other. Crashes involving multiple vehicles often happen when some vehicles are traveling at different speeds than others.

This sign indicates parking spaces that are reserved for vehicles displaying Persons with Disabilities license plates, Disabled Veteran license plates, and/or disabled parking placards.

Bring your vehicle to a complete stop at a crosswalk to yield the right-of-way to any vehicle or pedestrian already in the intersection. You may carefully proceed if your lane is completely clear.

A triangular yellow sign with black lettering indicates a no passing zone. It will appear on the left side of a two-way, two-lane roadway at the beginning of an area where prohibitive pavement markings are also used.

A flashing yellow light at an intersection indicates that drivers should slow to a safe and reasonable speed and proceed with caution.

The stop sign is the only eight-sided sign you will see on any roadway. When you encounter a stop sign, you must come to a complete stop. You may not proceed until the way is clear for you to completely and safely pass through the intersection.

Warning signs are usually yellow with black markings. They alert you to conditions that are immediately ahead. This sign warns drivers about the presence of traffic signals at an intersection ahead.

Your vehicle’s blind spots are the areas that you cannot see in your mirrors. Look over the appropriate shoulder to check your blind spot when changing lanes.

Adjust your speed before entering a curve. Driving too fast around a curve can cause your tires to lose contact with the road.

When you are turning left from a two-way street, begin in the lane closest to the centerline and start your turn just before the front of your car reaches the center of the intersection. Do not cut the corner. Steering hand-over-hand, turn into the first available legal lane.

While it can create special problems for large vehicles, strong wind can cause problems for all drivers. Wind can lower visibility by blowing dirt and dust into the roadway, but it can sometimes also physically move a vehicle.

If you try to insert your vehicle between a turning truck or bus and a curb, you may suffer a serious crash. To avoid a collision, do not turn until the truck or bus has completed its turn.

Alcohol, in any concentration, is a depressant. It slows all nerve impulses and bodily functions, resulting in a lessening of inhibitions and negatively affecting a consumer’s ability to concentrate and stay alert.

Use your low beam headlights when driving in foggy, snowy, or rainy conditions. Light from high beam headlights will reflect back, causing glare and making it even more difficult to see ahead.

This sign indicates that you may not make a U-turn. You cannot turn around to go in the opposite direction at an intersection where this sign is posted.

A round sign means you are approaching a railroad crossing. This sign is posted a few hundred feet in front of the tracks and tells drivers to slow down, look, listen, and prepare to stop.

Yellow lane markings indicate a separation of lanes where traffic is traveling in opposite directions. When you see double solid yellow lane markings, passing is prohibited from both directions.

When leaving an alley, driveway, or parking lot to enter a roadway, you must stop before driving onto a sidewalk or sidewalk area. Pedestrians and existing traffic have the right-of-way.

Not getting enough sleep is a cause of poor driving behavior. Just like drugs and alcohol, sleepiness slows reaction time, decreases awareness, and impairs judgment.

You may never drive off the paved or main-traveled portion of the road and onto the shoulder to pass another vehicle.

Warning signs are usually yellow with black markings. This sign indicates that there is a steep hill ahead. Slow down and be ready to shift to a lower gear to control your speed and protect your brakes from damage.

If it feels like your tires have lost contact with the surface of the road, you should ease your foot off the gas pedal and stay off the brakes. Do not try to stop or turn until your tires are gripping the road again.

Slow-moving vehicles, such as farm tractors, road maintenance vehicles, and animal-drawn carts, display an orange and red triangle on the back.

This is a low clearance warning sign. It indicates the distance from the road surface to the bottom of a bridge or overpass (in this case, 12 feet, 6 inches).

Your vehicle’s stopping distance increases as your speed increases. When driving at high speeds, it is important to look well ahead of your vehicle to allow yourself space to safely react to hazardous situations.

Drivers of trucks, buses, vans, or any vehicles pulling campers or trailers may not be able to see you if you are driving directly behind them. Increase your following distance when driving behind one of these vehicles. Additionally, large vehicles can block your view of the road, so increase your following distance to look around the sides of the vehicle and see the road ahead.

Blood alcohol concentration (BAC) is a measurement of the percentage of alcohol in the blood. The higher the BAC number, the more impaired a person is.

Warning signs provide notice to road users of a situation that might not be readily apparent and are usually yellow with black markings. This warning sign tells drivers to be alert to an intersecting side road ahead.

Before you enter an intersection, look to both the left and right for approaching vehicles or crossing pedestrians. Look to your left a second time, as vehicle approaching from your left will be closer than those approaching from your right. Look across the intersection before you start to move to make sure the path is clear all the way through.

When approaching a railroad crossing, you must look, listen, slow down, and prepare to stop. Let any trains pass before you proceed.

Do not pass unless you have enough space to return to the driving lane. Before you return to the driving lane, be sure you have enough room between yourself and the vehicle you have passed. When you can see both headlights of the passed vehicle in your rearview mirror, it is safe to return to the driving lane.

At a railroad crossing marked with this sign, a driver should look both ways, listen for any trains, and be prepared to stop if any trains are nearby. Never try to outdrive an oncoming train.

You should never change lanes within an intersection. Before changing lanes, always look over your shoulder to check your blind spot. Be alert to other drivers moving into the same lane.

Driving too slowly can be dangerous because it may cause drivers behind you to become frustrated and make dangerous moves to pass you. It is safest to drive with the flow of traffic, within the legal speed limit.

Only use your horn when it is necessary to avoid collisions. Do not use your horn if a driver or bicyclist is moving slowly and you want him or her to drive faster or get out of your way.

At a green light, you must give the right-of-way to any vehicle, bicyclist, or pedestrian in the intersection. If a pedestrian begins crossing the street after the traffic signal light starts flashing, wait until they have crossed the street before proceeding.

The flashing overhead lights and stop arm on a school bus will be activated when the bus is stopped to load or unload students. If approaching a bus using these signals, you may not proceed until the red lights have stopped flashing and the stop arm has been retracted. Never pass a school bus that is dropping off or picking up students.

Being under the influence of alcohol affects your judgment. Good judgement is necessary to react appropriately to things that you see or hear while on the road. Even if you are below the legal blood alcohol limit, consuming any amount of alcohol is likely to affect your ability to drive safely.

As you enter a work zone, signs and message boards will warn you of workers, slow-moving equipment, and/or closed lanes ahead. You should reduce your speed and be prepared to slow down or stop.

By definition, blind spots are areas that cannot be seen using your mirrors. To check your blind spots, you should look over your shoulders.

When you follow so closely behind a truck that you cannot see the truck driver’s side view mirrors, the trucker cannot see you and has no way of knowing you are there. Tailgating a truck, or any vehicle, is dangerous because you take away your own cushion of safety if the vehicle in front of you stops quickly.

After coming to a full stop, vehicles should proceed through a four-way stop in the order in which they arrive to the intersection. If multiple vehicles arrive at the same time, the vehicle on the left must yield the right-of-way to the vehicle on the right.

Use your low beam headlights when driving in fog, rain, or snow. High beam lights can reflect off the weather conditions, lowering visibility even more.